polyhedral names and notations

One understands that there are infinities of polyhedra; thus it is unrealistic to want to name them all... Nevertheless since a long time names, sometimes complicated ones but always following a certain logic, have been given the best known of them and to certain types or families of polyhedra with interesting properties.

The first idea was naming a polyhedron according to its number of faces by using the Greek root -hedron (seat, base) with numerical prefixes:
4     tétra
5     penta
6     hexa
7     hepta
8     octa
9     ennéa
10     déca
11     hendéca
12     dodéca
14     tétrakaïdéca
20     ico
24     icotétra
30     triaconta
60     hexaconta
100    hecato
An adjective is added to:
•  specify the faces' shape: the cube is the regular hexahedron, the rhombic dodecahedron's faces are rhombuses . . .
•  identify a polyhedron in a series: pentagonal prism . . .
•  tell how to get the polyhedron from a more elementary one: truncated cube, snub dodecahedron, stellated octahedron . . .
Be careful! stellated  is sometimes misused to tell that the polyhedron has been augmented with pyramids on all its faces.
For "kite-shaped" faces trapezoidal  or deltoidal  are used.

The prefix rhombi  indicates that the planes of the 12 (resp. 30) square faces are those of a rhombic dodecahedron (resp. rhombic triacontahedron): four Archimedean polyhedra, the small rhombihexahedron . . .
There is no rule for the use of anti: antiprisms, anticube . . .
hemi  is used to indicate that faces go through the center: cubohemioctahedron, rhombic dodecahemioctahedron . . .

The snub operation introduces "rings" of new faces around the existing faces: two triangles for each edge, and an x-gon for each x-vertex; in this way the snub cube is also the snub octahedron. Each face of the "expanded" polyhedron is rotated by the same angle and in the same direction, thus this leads to two enantiomorph polyhedra (mirror images) depending on the rotation's direction.
The n-kis operator introduces a new vertex on the axis of each n-face, and therefore n triangles (in fact each x-face is augmented with a x-pyramid); so the tetrakis-cube has 6x4=24 triangular faces, thus is an icositetrahedron.

A compound polyhedron  is the union of several identical or related polyhedra arranged to preserve a polyhedral symmetry: the anticube is a compound of two regular tetrahedra, my favorite is the compound of five regular tetrahedra.

A few names refer to the discoverer: lord Kelvin's (truncated octahedron) or Romé de l'Isle's (rhombic triacontahedron) polyhedron, Kepler' star (stellated octahedron), Kepler's hedgehog (great stellated dodecahedron), Poinsot' star (great dodecahedron) . . .

The names of the Johnson's polyhedra and uniform polyhedra use a more varied vocabulary: (gyro)elongated, (tri)augmented, para/metabiaugmented, gyro/orthocupola or rotunda ...
Crystallographers use a different vocabulary for certain crystal forms.

Schläfli's and Wythoff's symbols

Schläfli's symbols like {p,q} allow to describe regular polyhedra: q p-gons around each vertex.
   examples: {4,3} designates the cube and {5/2,5} the small stellated dodecahedron.
For the Archimedeans and the uniform polyhedra letters are used to indicate transformations: t for truncated, s for snub . . .
   examples: t{3,4} designates the truncated octahedron and s{5,3} the snub dodecahedron.

The more complex Wythoff's symbols are used to describe the uniform polyhedra. A polyhedral kaleidoscope (three mirrors building a trihedron) is associated to a spherical triangle defined by central projection of a face on a sphere centered on the common point of the symmetry axes. The polyhedron's vertices are the images by the kaleidoscope of a particular point P of the spherical triangle with angles π/p, π/q and π/r (p, q and r rational); then the symbol depends of P:  |pqr,  p|qr,  pq|r  or  pqr|.
   examples:  5 | 2 3  designates the regular icosahedron,  2 5 | 3  the truncated icosahedron,  | 2 3 4  the snub cube,  4/3 3 4 |  the cubohemioctahedron  and  2 | 5/2 5  the dodecadodecahedron.

Du Val's notation

Used to describe the stellations of a polyhedron, it allows to classify the cells defined by the faces' planes and to specify which ones are used for a given stellation.

John Conway's notation

John Conway proposed a nifty notation, simple and efficient, which not only allows to describe many polyhedra, but which is also a tool to conceive new ones. At the start one chooses an elementary polyhedron denoted by a capital letter; each transformation is specified with a lower-case letter before the notation of the preceding step.

As starting polyhedron one may choose one of the regular polyhedra T, C, O, D or I, a regular prism Pn, a regular antiprism An or a regular pyramid Yn (with n ≥ 3 for the base's n-gon). Let us notice that P4=C, A3=O and Y3=T.
John Conway defined eleven operators, and George W. Hart added three (the last three):

d change to the dual (each face becomes a vertex and each vertex becomes a face): ddX=X
t or tn truncate is the truncation of all vertices: the face's orders are doubled, at each x-vertex an x-face is created
tn is the truncation reduced to the n-vertices     examples: t5dA5=D, tnYn=Pn (for n>3)
a ambo is the truncation through the mid points of the edges: the ,midpoint of each edge becomes a 4-vertex   aX=adX
examples: aC=aO is the cuboctahedron, aI=aD is the icosidodecahedron, aT=O, aYn=An
k or kn kis  creates a new vertex on the axis of each face and replaces each x-face by x triangles
kis and truncate are conjugated by duality: kX=dtdX    example: kC is the kiscube or tetrakis-hexahedron
j join (dual of ambo: jX=daX)  creates a 4-face to replace each edge (it's k with the triangles coplanar by pairs)
examples: jC=jO is the rhombic dodecahedron, jD=jI is the rhombic triacontahedron, jT=C
e expand  "expands" the polyhedron: a rectangle is created to replace each edge and an x-face on each x-vertex
eX=aaX and eX=edX   examples: eC=eO is the small rhombicuboctahedron, eI=eD is the small rhombicosidodecahedron
s snub  creates "rings" of faces around the existent faces: two triangles for each edge, and an x-gone for each x-vertex.
All the vertices of sX are of order 5.   sX=sdX has no symmetry planes.   sT=I
g gyro  is dual to snub: gX=dsdX=dsX has no symmetry planes and all its faces are pentagonal
g is related to k, but a new edge is connected to the third of an existent edge (Z distorted)
example: the gyrododecahedron gD=gI is the pentagonal hexecontahedron, gT=D
b bevel  is defined by  bX=taX =bdX    example: bD is the great rhombicosidodecahedron
o ortho is dual to expand : oX=dedX=deX=jjX    example: oD is the deltoidal hexecontahedron
o may be related to k, but a new edge is connected to the midpoint of an existent edge (V distorted)
m meta is dual to bevel : mX=dbdX=dbX=jkX and mX=mdX
m appears as a combination of k and o (with the two types of new edges)
r (Hart) reflect  (mirror image) exchanges the enantiomorph forms of a chiral polyhedron
p (Hart) propellor  creates n quadrilaterals around each n-face    example: pT is the tetrahedrally stellated icosahedron
p is self-dual  pX=dpdX and pdX=dpX, and it commutes with a (pa=ap), j and e
c (Hart) canonic  transforms a convex polyhedron in its canonical form

Only s and g reduce the group of symmetries of the polyhedron which they transform (the symmetry planes disappear).
Let's notice that this notation specifies only the topology of the polyhedron, not its geometry.
Here are examples of "nice" polyhedra created using Conway's notation and a program by Hart for a convenient geometric realization.
George W. Hart's algorithm allows today to generate easily polyhedra with several thousands of faces in a few dozens of seconds; unfortunately only an old version 4.8 of Netscape with a VRML plug-in displays the created VRML file (the pleasure to create quickly outstanding polyhedra is worth installing this old browser).

stI=dgkD (272 faces) and its dual (180 faces)

sdk5sI=dgk5dgD (632 faces) and its dual (420 faces)

two enneacontahedra (90 faces, 92 vertices, 180 edges)
jtI=jkD=dakD  and  jtD=jkI=dakI
(902 faces, 900 vertices, 1800 edges)

references: •  works of Kepler, Catalan ..., the two books by Magnus J. Wenninger: Polyhedron Models (pages 4-10) and Dual Models
•  pages from the site Virtual Polyhedra: polyhedra generator (Conway's notation) and sculptures by George W. Hart
•  Naming polygons and polyhedra  by John Conway
•  Visualization of Conway Polyhedron Notation  by Hidetoshi Nonaka
•  a Java applet by Bob Allanson to visualize a few classical transformations

home page
convex polyhedra - non convex polyhedra - interesting polyhedra - related subjects March 2005
updated 13-04-2012